Plastic windows. 5 key points of high-quality window installation.

Currently, plastic windows are very popular in Novorossiysk. They are practical and provide good heat and sound insulation, and have an attractive appearance. If the quality level of windows from most manufacturers is high, then there are serious complaints about the installation process. Improper installation will negate all the advantages and advantages, the main positive qualities of the product.Therefore, you need to know how to install plastic windows correctly. Let's look at the main points and possible nuances that should be considered during installation.- Before starting the installation, inspect the window to identify possible structural defects. Check the size of the new window and the window opening.- The window in the opening is set strictly according to the level, taking into account the mandatory thermal seam, which prevents the frame from contacting the concrete surface.- Check the availability of the required amount of fasteners on the exposed window, and the absence of horizontal and vertical deviations.- Before applying the mounting foam, it is necessary to moisten the surfaces, this will ensure better adhesion. It is important to consider the degree of expansion of the foam before solidification.- In order to avoid blowing, fogging windows, freezing in cold weather, it is necessary to carefully seal the thermal seam. Exposed areas of foam exposed to the environment are rapidly destroyed.After the plastic windows are installed, you need to make sure the quality of the installation, the functioning of the elements and fittings.Make a visual inspection, the window should be level. Check the operation of the fittings, this is an important component of the proper functioning of the entire structure. If the doors open and close arbitrarily, it means that the level was not maintained during installation.Installation errors can cause windows to fog up. Poor pouring of mounting foam contributes to the freezing of the frame, the formation of ice. A wide window sill in the room prevents heat from entering from the radiator, which may cause dew to form. A weak thermal seam is the cause of condensation and ice on the slopes.Fogging is possible due to natural causes.:- no air exchange- poor exhaust ventilation- excess moisture in the kitchen and bathroom.It is recommended to ventilate the room regularly, this will help prevent the appearance of fungus and mold.Using these simple recommendations, you will be able to check how well plastic windows are installed, ensure proper and timely care for them. https://xbae.ch/